Installing Bitcoin Core on Ubuntu - Bitzuma

Make your own stakebox. Ultimate beginners guide how to compile any wallet on AARCH64 (Raspbery pi and other SBC)

I contemplated to wrote this for a long time, so it's finally time.
As you know a lot of altcoins uses PoS (Proof-of-stake) way of "mining" coins. Which basically means, that you hold coins on your unlocked wallet and you are receiving stakes as a reward. This requires very little power and it can bring you a lot of rewards, at just 10W from the wall.
So first I am using latest Raspbian on RPI4B 4GB in this example.Setting up Raspbian is not part of this process since it's very well documented. I recommend to change user from pi to something else due to security concerns and you can also do other stuff just search "security Raspberry PI" and you find a lot of articles, but this is not the focus of this guide.
I know there are a lot of guides on the internet, but I am using like 5 sources, so it's compiled what other people wrote and some of my research.
I am using AnyDesk insted of SSH or VNC server, because it works it's ligthweit and it just works.
So after you see the gui of Raspbian, just launch terminal (CTRL + ALT + T) and do basic thing:
sudo apt-get update && sudo apt-get upgrade
Than press Y and let it run, after is finished, we need to prepare so dependency packages. Since most of the wallets using Berkeley DB 4.8 we need to obtain it.
So in terminal wrote:
cd cd Downloads wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar -xzvf db-4.8.30.NC.tar.gz cd db-4.8.30.NC/build_unix ../dist/configure --enable-cxx make sudo make install 
So wait unti it's finished and than you can delete files in Downloads folder in gui or use:
sudo rm -r [folder] 
So next thing we need to install some libraries.
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev 
And pres y and let it run. After that another set of libraries:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++- dev libminiupnpc-dev qt5-default 
And then again pres y and let it run. Some wallets need older version of libssl1.0-dev, so for for safe compiling we install that as well:
sudo apt-get install libssl1.0-dev 
Pres y and let it run. Warning don't use sudo-apt get autoremove, since it would wipe this package, since it's old.
Next thing we are going to obtain Bitcoin PPA filest, which can be done like this.
cd /etc/apt/sources.list.d/ sudo nano bitcoin.list 
Paste this in there:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main 
And CTRL+X and than y, then do this:
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E sudo apt-get update 
So now we are ready for compiling. So we are going create folders. CD yourself where this folder should be situated, if you for example have plugged in some external drive. Then:
mkdir Crypto cd Crypto 
And then we have to choose wallet which you want to compile. I am choosing Streamies (STRMS) as an example, since it's pretty good coin for staking. So:
mkdir Streamies cd Streamies 
Then go to the github page and click on the green button on the left and click copy to clipboard, which gives you git link.
git clone https://github.com/Streamies/Streamies.git 
Watch the output folder which it creates, it's stated in the first two lines and copy then by highliting the text and CTRL+SHIFT+C copy it to your clipboard.
cd Streamies (this is that git created folder) ./autogen.sh ./configure CPPFLAGS="-I/uslocal/BerkeleyDB.4.8/include -O2" LDFLAGS="-L/uslocal/BerkeleyDB.4.8/lib" sudo make (this could take hours) sudo make install 
And you are done, files is going to be in folder /uslocal/bin (DO NOT delete git created folder, because you are going to need it for faster compiling, when wallet get's and update.)
cd /uslocal/bin 
Now you can list files by:
ls 
And then you can copy/move them where ever you want by using:
sudo mv * [destination full path] 
Let it run and go back to folder where you move those files.
sudo chmod +x streamies-qt (since we want to run wallet) 
In most cases compiled files are going to in format of "shared library" so we need to create script to run it. Open up a text editor from gui or through nano. And paste this to that file:
#!/bin/bash ./streamies-qt 
And save it as a sh file, for example run.sh. Then we need to make it runnable so:
sudo chmod +x run.sh 
Now to run it, it's just:
./run.sh 
And here we are glorious GUI wallet appears and you are done, you can paste blockchain, wallet.dat from other sources, so this migration is pretty easy and you, if you have it on for exaple flash disk.
So this is basic how to compile QT wallets on AARCH64. I am running 7 wallets, 2 of those are Masternodes and RPI 4B 4GB would handle way more, I am at best on half of my RAM.
Some wallets need more package, but it's not much of and issue, since compiling stops and you just copy paste nape which is missing put it in the google and add "apt-get" after the name of package and you are going to see, what is the name of the packages so it can be retreived from package assinstant aka apt-get. So basically:
sudo apt-get install [package name] 
Then press y and again wrote:
sudo make 
This process is going to continue where it was left off, so nothing is going to run from beginning.
Updating wallets is basically exactly same, just repeat steps from "git clone" and after that proceed as it was written above.
So I hope this helps some of you, to use this at home and not on some VPS, if you are anxious as me, to host my wallets on remote server.
submitted by M1chlCZ to CryptoCurrency [link] [comments]

Vertnode - An automated solution for installing Vertcoin node(s) on Single Board Computers

Hello Vertcoin Community,
Eager to contribute to the Vertcoin Community I began creating step by step walkthrough guides on how to get a Vertcoin node up and running on a Raspberry Pi, Raspberry Pi Zero and Intel NUC. Along with information to get a Vertcoin node up and running was also optional steps to install p2pool-vtc.
I decided that while this step by step guide might be helpful to a few, a setup script may prove to be useful to a wider range of people. I have this script to a point where I think it may be productive to share with a bigger audience, for those who are brave and have this hardware sitting around or like to tinker with projects; I invite you to test this setup script if you are interested, if you run into errors any sort of verbose console output of the error proves to be extremely helpful in troubleshooting.
The script was designed to produce a “headless” server... meaning we will not be using a GUI to configure Vertcoin or check to see how things are running. In fact, once the server is set up, you will only interact with it using command line calls over SSH. The idea is to have this full node be simple, low-power, with optimized memory usage and something that “just runs” in your basement, closet, etc.
Why run a headless node on a Single Board Computer?
The idea is to have this full node be simple, low-power, with optimized memory usage and something that “just runs” in your basement, closet, etc.
Required: USB Flash Drive 6GB - 32GB
Please note that the script was designed for Single Board Computers first and looks for an accessible USB Flash Drive to use for storing the blockchain and swap file, as constant writing to a microSD can degrade the health of the microSD.
Supports

Hardware

All of the hardware listed above is hardware that I have personally tested / am testing on myself. The plan is to continue expanding my arsenal of single board computers and continue to add support for more hardware to ensure as much compatibility as possible.
Functionality
It is worth noting that LIT can be ran with multiple configurations, the ones displayed in the Post Installation Report reflect values that run LIT with the Vertcoin Mainnet. Please be aware that the Vertcoin Testnet chain has not been mined 100% of the time in the past, if you make transactions on the Vertcoin testnet that do not go through it is likely because the chain has stopped being mined.
BE CAREFUL WITH YOUR COINS, ONLY TEST WITH WHAT YOU ARE OKAY WITH LOSING IF YOU USE THE MAINNET.

Vertcoin Testnet Coins

https://tvtc.blkidx.org/faucet/
I've included some documentation on LIT I created which includes information I found to be useful: https://github.com/e-corp-sam-sepiol/vertnode/blob/mastedocs/lit.md
Please visit the mit-dci/lit github repository for the most up to date information on lit: https://github.com/mit-dci/lit

Vertnode | Automated Vertcoin Node Installation Script

https://github.com/e-corp-sam-sepiol/vertnode

Recommended: Use Etcher to install the chosen OS to your microSD card / USB flash drive.

If you intend on installing Ubuntu Server 16.04 to your Intel NUC please use Etcher to install the .iso to your USB flash drive.
https://etcher.io/
PLEASE NOTE THIS SCRIPT MAY GIVE AN ERROR. THIS IS THE NATURE OF TESTING. PLEASE REPORT YOUR ERRORS IF YOU WANT THEM TO BE FIXED/RESOLVED. THANK YOU FOR BETTERING THE DEVELOPMENT OF THIS SCRIPT.

Ubuntu Server 16.04 Setup Details

You can use different clients to ssh into your node. One option is using PuTTY or Git Bash on Windows which is included in the desktop version of Git. If you are using Linux you can simply open a new terminal window and ssh to the IP address of your node (hardware you intend installing the Vertcoin node on).
You will need to know the IP address of your node, this can be found on your router page.
ssh 192.168.1.5 -l pi For example, this command uses ssh to login to 192.168.1.5 using the -l login name of pi. The IP address of your node will likely be different for you, in this example I am logging into a Raspberry Pi which has a default login name of pi.
A brief list of commands that can be used to check on the Vertcoin node status:
vertcoin-cli getblockchaininfo | Grab information about your blockchain
vertcoin-cli getblockcount | Grab the current count of blocks on your node
vertcoin-cli getconnectioncount | Grab the current count of connections to your node. A number of connections larger than 8 means that you have incoming connections to your node. The default settings are to make 8 outgoing connections. If you want incoming connections please port forward your Raspberry Pi in your Router settings page.
vertcoin-cli getpeerinfo | Grab the information about the peers you have connected to / are connected to
vertcoin-cli getnettotals | Grab network data, how much downloaded/upload displayed in bytes
tail -f ~/.vertcoin/debug.log | Output the latest lines in the Vertcoin debug.log to see verbose information about the Vertcoin daemon (ctrl+c to stop)
Thank you to all who have helped me and inspired me thus far, @b17z, @jamesl22, @vertcoinmarketingteam, @canen, @flakfired, @etang600, @BDF, @tucker178, @Xer0
This work is dedicated to the users of Vertcoin, thank you for making this possible.
7/20/2018 Thank you @CommodoreAmiga for the incredibly generous tip <3
You can reach me @Sam Sepiol#3396 on the Vertcoin Discord, here on reddit or @ [email protected]
submitted by ecorp-sam-sepiol to vertcoin [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

Use the BTCP full Node on a Ubuntu 16.04 LTS from Terminal

In this post I want to show some use of the CLI BTCP wallet from linux terminal.
DISCLAIMER:
First of all, use this tutorial with small amount of BTCP, for example i used 0,01 BTCP, until you feel confortable with commands. An error can happen easily and as result you can loose your money. Be careful! Do it at your risk!
I consider you have already installed the wallet following this instructions:
https://github.com/BTCPrivate/bitcoinprivate
I use Ubuntu 16.04 LTS 64bit, but commands are similar for the windows client.
Open a terminal from your Ubuntu Desktop:
[email protected]:~$ 
type:
[email protected]:~$ ./BitcoinPrivate/src/btcpd --daemon 
you should see the message:
BTCP server starting 
This means the wallet is running in daemon mode.
to stop the node just typing:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli stop 
Answer:
BTCP server stopping 
You can also run the wallet in terminal, is nice to see it, let's try:
 [email protected]:~$ ./BitcoinPrivate/src/btcpd 
You will see the BTCP logo in text mode and the following info:
Thank you for running a Bitcoin Private node! You're strengthening the network and contributing to a social good. To ensure you are fully protecting your privacy when running BTCP, see . Block height | 340079 Connections | 8 Network solution rate | 8359387 Sol/s You are currently not mining. To enable mining, add 'gen=1' to your btcprivate.conf and restart. Since starting this node 1 minutes, 33 seconds ago: - You have validated 695 transactions! [Press Ctrl+C to exit] [Set 'showmetrics=0' to hide] 
See, you can also mine using the wallet! Nice! Just add gen=1 in the file btcprivate.conf. Probably you will never mine a coin, but still you to strenght the net, so, you can try if you want, then disable it when done:
Press CTRL and C to stop the server, then restart the server in daemon mode otherwhise you have to open a new terminal.
Let's find btcprivate.conf and other useful files:
[email protected]:~$ cd .btcprivate [email protected]:~/.btcprivate$ ls 
Answer:
blocks btcprivate.conf chainstate db.log debug.log fee_estimates.dat peers.dat wallet.dat 
You see here: btcprivate.conf and wallet.dat
Edit configuration file:
[email protected]:~/.btcprivate$ pico btcprivate.conf 
add gen=1 if you want to mine, then CTRL X and Y to save.
Restart the wallet....and....
Block height | 340091 Connections | 8 Network solution rate | 8211926 Sol/s Local solution rate | 0.0075 Sol/s Since starting this node 8 minutes, 5 seconds ago: - You have validated 684 transactions! - You have completed 1 Equihash solver runs. You are mining with the default solver on 1 threads. 
Congratulations! You are mining!
Now have a look to the wallet.dat file:
Nb: wallet.dat is your wallet!! If you delete it you will loose all your money!!!
wallet.dat is not encrypted, so, if you want to backup it i do as follows:
[email protected]:~/.btcprivate$ cp wallet.dat home/btcp/Desktop/wallet_btcp_back.dat 
Now you will find the wallet on your desktop. Zip it with an AES256 encryption and a strong password. Test if it works properly: extract it again and copy it in the directory, but before make an other copy of the wallet.dat file. Beware! I almost deleted the file once!
Nb: wallet.dat is your wallet!! If you delete it you will loose all your money!!!
Go back to your home directory, now, we want to play with our wallet:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli help 
if everything is running properly, you will see a list of commands like this:
z_exportwallet "filename" z_getbalance "address" ( minconf ) z_getnewaddress z_getoperationresult (["operationid", ... ]) z_getoperationstatus (["operationid", ... ]) z_gettotalbalance ( minconf ) z_importkey "zkey" ( rescan startHeight ) z_importwallet "filename" z_listaddresses z_listoperationids z_listreceivedbyaddress "address" ( minconf ) z_sendmany "fromaddress" [{"address":... ,"amount":...},...] ( minconf ) ( fee ) z_shieldcoinbase "fromaddress" "tozaddress" ( fee ) zcbenchmark benchmarktype samplecount zcrawjoinsplit rawtx inputs outputs vpub_old vpub_new zcrawkeygen zcrawreceive zcsecretkey encryptednote zcsamplejoinsplit [email protected]:~$ 
Nice! Wallet is running properly. Now try an other command: getinfo
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getinfo 
Answer:
{ "version": 1001251, "protocolversion": 180004, "walletversion": 60000, "balance": 0.00000000, "blocks": 340074, "timeoffset": 0, "connections": 8, "proxy": "", "difficulty": 167290.7158221716, "testnet": false, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000, "relayfee": 0.00000100, "errors": "" } [email protected]:~$ 
You see some useful info about your wallet/node:
blocks is the block heights, in this case is synced with the network. If not the number would be lower.
The wallet is connected to other 8 nodes, the balance is 0.00 BTCP
An other info command can be getblockchaininfo:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getblockchaininfo 
Answer:
{ "chain": "main", "blocks": 340074, "headers": 340074, "bestblockhash": "0000000145c0011d8e914f4ba68d1443c7ae0dd15bdf0bc300994dd5282710aa", "difficulty": 165971.1181999981, "verificationprogress": 0.9999992572690658, "chainwork": "0000000000000000000000000000000000000000000000000002e8314e4484da", "pruned": false, "commitments": 663480, 
we see syncing is almost finished:
"verificationprogress": 0.9999992572690658, (99,99999%)
Now test the wallet with command getwalletinfo
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getwalletinfo 
Answer:
{ "walletversion": 60000, "balance": 0.00000000, "unconfirmed_balance": 0.00000000, "immature_balance": 0.00000000, "txcount": 0, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 } [email protected]:~$ 
Now we want to send some btcp to this wallet. First we need an address, get one using getnewaddress:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getnewaddress 
Answer:
b1Cabjwvcce7N8ea9Gxxxxxxxxxxxxxxxx [email protected]:~$ 
Send at this address some BTCP, i sent 0.01 for testing purpose using your ledger, or your wallet, then check if the transaction is done:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getwalletinfo 
Answer:
{ "walletversion": 60000, "balance": 0.00000000, "unconfirmed_balance": 0.01000000, "immature_balance": 0.00000000, "txcount": 1, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 } 
Done! Unconfirmed balance is 0.01! Just wait some confirmations.
after a while:
"walletversion": 60000, "balance": 0.01000000, "unconfirmed_balance": 0.00000000, "immature_balance": 0.00000000, "txcount": 1, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 
Now send the coins to a new address. I am using this command:
sendtoaddress "btcpaddress" amount ( "comment" "comment-to" subtractfeefromamount )
subtractfeefromamount parameter can be true or false
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli sendtoaddress "b1Nb42GoK9kmsxxxxxxxxxxxxx" 0.01 "" "" true 
Answer:
2c5d3d1a3b5eec414b721d3817487f53c5eebxxxxxxxxxxxxxxx [email protected]:~$ 
Now check the wallet:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getwalletinfo 
Answer:
{ "walletversion": 60000, "balance": 0.00999808, "unconfirmed_balance": 0.00000000, "immature_balance": 0.00000000, "txcount": 2, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 } 
I sent BTCP to the same wallet, so now i have less BTCP because of the fees.
try more commands:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli listreceivedbyaddress 
Answer:
[ { "address": "b1Ep2wi2tUnKf433Vaxxxxxxxxxxxx", "account": "", "amount": 0.01000000, "confirmations": 6, "txids": [ "833533440a13c09fda6e90d0c5xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" ] }, { "address": "b1Nb42GoK9kmsVZ9KPxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "account": "", "amount": 0.00999808, "confirmations": 1, "txids": [ "2c5d3d1a3b5eec414b721d3817487f53c5xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" ] } 
This is the list of all used addresses.
Now find the money and the address where they are: use listunspent
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli listunspent 
Answer:
[ { "txid": "2c5d3d1a3b5eec414b721d381748xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "vout": 0, "generated": false, "address": "b1Nb42GoK9kxxxxxxxxxxxxxx", "account": "", "scriptPubKey": "76a914c6bdf3bc8aedxxxxxxxxxxxxxxxxxx", "amount": 0.00999808, "confirmations": 6, "spendable": true 
Well done.
Other useful commands can be: dumpprivkey to extract the private key from an address
Be careful! Exposing your private keys will end in loosing your money
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli dumpprivkey b1Ep2wi2tUnxxxxxxxxxxx 
Obtaining the pvt key:
Kz29e62Bmxxxxxxxxxxxxxxxxxxxxxxx 
And now, swipe the private key using the command: importprivkey "btcpprivkey" ( "label" rescan )
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli importprivkey "Kz29e62Bmxxxxxxxxxxxxxxxxxxxxx" "" true 
Let's do a shielded transaction!
first, you must have a z_address:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_getnewaddress 
Answer:
zkEvCiVwgHb3NFi2ee9HGPjno2xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 
Check balaces, with also z_addres:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_gettotalbalance 
Answer:
{ "transparent": "0.00999808", "private": "0.00", "total": "0.00999808" } 
Now send some BTCP to the z_address. First, check where BTCP are:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli listunspent 
Output:
[ { "txid": "72f568d1ed51524b69f1xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "vout": 0, "generated": false, "address": "b1LDhxBJxxxxxxxxxxxxxxxxxxxxxx", "scriptPubKey": "76axxxxxxxxxxxxxxxxxxxxxxxxxxxxxxe088xx", "amount": 0.00889808, "confirmations": 556, "spendable": true } ] 
Now, sent a little transparent amount to the shielded address we got before:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_sendmany "b1LDhxBJxxxxxxxxxxxxxxxxxxxxxx" "[{\"amount\":0.001, \"address\":\"zkEvCiVwgHb3xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx\"}]" 
Output:
opid-xxxxxxx-36c4-xxxx-beb2-xxxxxxxxxxxx 
Now your PC will work a while, it's CPU consuming...so...check:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_getoperationresult 
until you receive the answer:
[ { "id": "opid-xxxxxx-xxxxx-4a5d-beb2-xxxxxxxxxx", "status": "success", "creation_time": 1529426885, "result": { "txid": "f87e8d5e96a8a0xxxxxxxxxxxxxxx" }, "execution_secs": 216.686332567, "method": "z_sendmany", "params": { "fromaddress": "b1LDhxxxxxxxxxxx", "amounts": [ { "amount": 0.001, "address": "zkEvCiVwgHb3NFxxxxxxxxxxxxxxxxxxR" } ], "minconf": 1, "fee": 0.0001 } } ] 
Done! On my old PC it took 216.68 seconds!
Next will be a reverse operation, from Shielded address to transparent address. See you soon....
Play with your full node wallet and have fun.
Remember: these commands are almost the same in all the bitcoin based coins, so you also learnt how to use many other wallets!
submitted by xivan71 to u/xivan71 [link] [comments]

Zeus/Gaw ASIC Setup Guide for Linux/Raspberry Pi

So I recently I became quite interested in mining and cyptocurrencies in general. So interested in fact that I bit the bullet and decided to buy myself a GAW Fury.
I then spent some time doing research on how to set up a GAW or Zeus ASIC on Linux, in particular on a Raspberry Pi, and have found most guides to be awful. The reason they are so bad IMHO is that they assume quite a bit of prior knowledge, either with Linux or mining, and give very little instructions. So I have tried to put together a guide that requires very little prior knowledge.
It is my aim that anyone could get their shiny new asic up and mining in no time using this guide. Anyway, I present...

The Complete Noobs Guide to Setting Up a Zeus or Gaw ASIC on Debian/Ubuntu/Raspberry Pi

Resources

About Cyrptocurrencies and Their Jargon

If you are new to cryptocurrencies and how they work I suggest taking a look at this series of KhanAcademy videos. They are for Bitcoin but the theory is the same. I found them very helpful when it came to understanding what mining actually does and the mechanics of cyrptocurrencies.
Also take a look at sircamm22 his info found here, is great and breaks down a large number of concepts. I slightly disagree with no. 21 regarding preordering. Just exercise common sense.

Linux

If you are new to Linux you could follow along by simply typing in the commands. However I highly recommend taking the time to learn what you are doing. This course is a great place to start.

Computer Setup

By the end of this section you will have your device turned on, fully setup and connected to the internet with.
Note: Commands to be typed into the command line will be displayed like this:
echo Hello World

Desktop/Laptop

For laptops and desktops already running Ubuntu or Debian I will assume you have setup your internet setup as part of the installation.
If not: There are plenty of guides out there and the installation/setup process is very easy. A good place to start for Ubuntu is here.
Now open up a terminal window. Ctrl + alt + t on a standard Ubuntu installation.
If you plan on using this PC without a monitor I would suggest installing an SSH Server.
These commands will be discussed later on in the guide.
sudo apt-get -y install openssh-server
sudo service openssh-server start

Raspberry Pi

The Raspberry Pi Foundation has put together a great guide in PDF format.
Use NOOBS it will save you a lot of trouble. NB: Some SD cards don't support NOOBs but will work fine if the image is put on using a different method.
Here is a great guide for setting up the Raspberry Pi SD card from Elinux.org. In fact it's a great place to start for anything RPi related. Raspberry Pi hub at Elinux.
Once the SD card is setup you will need to insert it into the Raspberry Pi and boot. Install Raspbian from the NOOBs menu and wait.
Follow this guide by Adafruit for first time setup. You will need to enable SSH Server.
I suggest not starting the desktop on boot. It can be easily run from the command line by typing startx.
Follow this guide by Adafruit to setup your network. Found here. No need to do this if you set up previously in the first time config.
We will also at this point want to setup ssh. Again I will point you to an Adafruit guide.
Once done exit back to a standard command line interface. This can be done in LXDE by using the power off menu located in the bottom right corner.

Miner Setup

Installing BFGMiner

If you want to the Raspberry Pi or PC without a monitor go ahead and SSH into your device.
So now you should be staring at a command line interface whether on the device with a monitor or via SSH.
First things first lets make sure we are all up to date. This will update our package list from the repositories and upgrade them to the newest version. "-y" Will simply say yes to any prompts.
sudo apt-get update && sudo apt-get -y upgrade
We are going to need to install some useful tools. Git-core is how we will clone and download BFGMiner from GitHub and Screen allows multiple command line instances and means if we exit out of ssh session or quit Terminal on Ubuntu, BFGMiner will continue to run.
sudo apt-get install git-core screen
We also need to download some other tools/dependencies to ensure that BFGMiner will compile successfully.
sudo apt-get -y install build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev libc-bin
Ok now change into your home directory.
cd ~
And clone BFGMiner by Darkwinde.
git clone https://github.com/Darkwinde/bfgminer.git
Once the download has completed move into the bfgminer directory.
cd bfgminer
The following steps may take a while.
Now run autogen.sh
sudo ./autogen.sh
You will need to make the configure script execuitable.
sudo chmod +x ./configure
Now configure bfgminer
sudo ./configure CFLAGS="-O3" --enable-scrypt
Now lets make!
sudo make
Install BFGMiner
sudo make install
One more thing...
sudo ldconfig

Running BFGMiner

If you haven't already plug in your ASIC.
Just confirm your system is recognising the ASIC.
lsusb
Its output should look similar to this (no need to type this in):
Bus 001 Device 005: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Yep there it is our ASIC listed as device 005. There is no need to install any drivers, unlike in windows, as they come in the kernel.
Now lets actually start BFGMiner.
You will want to start a screen session to ensure BFGMiner doesn't quite when you exit.
"-S" is the option for starting a new screen session. You can replace "miner" with anything you like.
screen -S miner
Now you can run the commands below.
Here is a sample of what you should type. You will need to replace somethings with your own values.
sudo bfgminer --scrypt -o stratum+tcp://URL:PORT -u USERNAME -p PASSWORD --zeus-cc CHIPCOUNT --zeus-clk 328 -S zeus:/dev/ttyUSB0
Where:
URL:PORT is the address and port of the pool you wih to use. Now I won't suggest a pool. I will leave that decision up to you. If you do wish to mine DOGE take a look at this site for a list of pools and comparisons.
USERNAME this is the username you use on the pool. Every pool is different. Check your pool's website for details. PASSWORD same as above. Specific to your pool, not every pool requires one.
CHIPCOUNT this is specific to which ASIC you are using.
For GAWMiner ASIC's:
  • War Machine: 256
  • Falcon: 128
  • Black Widow: 64
  • Fury: 6
For ZeusMiner ASIC's:
  • Blizzard: 6
  • Cyclone: 96
  • Hurricane X2: 48
  • Hurricane X3: 64
  • Thunder X2: 96
  • Thunder X3: 128
Now to make sure you don't stop mining when you exit ssh or terminal. Press:
ctrl + a + d
To come back to the BFGMiner screen simply run:
screen -r miner
You're done!!

Start on Boot

First off you will want to make sure you have BFGMiner running correctly. Ensure you have the miners set up properly and your pool correctly configured.
Start a BFGMiner instance, detailed above.
Once the instance has started and you are happy with how everything is working press "s" on your keyboard to enter the settings menu.
Now press the "w" key. Don't press enter. We want to specify where our config will go. Type:
/home/USERNAME/bfgminer.conf
Substitute USERNAME for your user. On a standard RPI install its pi. On ubuntu it's what you set during the instillation.
Now press the enter key to return back to the main BFGMiner screen. Press "q" on your keyboard to exit BFGMiner. You should now be back in the command line.
Now we want to edit a file called rc.local. Any commands in this file will be executed on boot.
sudo nano /etc/rc.local
Depending on your system this file may already contain some commands. Be careful not to delete them.
After the last command and before "exit 0" type the following on one line:
sudo -u USERNAME screen -d -m sudo bfgminer --config /home/USERNAME/bfgminer.conf
Where USERNAME = your username
Hit ctrl + x then y to save and exit nano.
The above command will create a new screen session and run bfgminer using the config we created earlier. All while as our username so that we can easily reattach.
Lets reboot to ensure it is working correctly:
sudo reboot
Once rebooted and logged in, show all running screen sessions:
screen -ls
Reattach to the session. You only need to use the numbers before the first dot.
e.g Mine looks like: 2480..hostname (13/07/14 12:02:09) (Detached). So I type:
screen -r 2480
Verify everything worked as expected. Then ctrl + a + d to exit.
You have now setup BFGMiner to restart on reboot.

Power Failure

If you are using a Raspberry Pi and it loses power it will automatically reboot on receiving power again.
For standard desktop PCs there is an option in some BIOS/UEFI to turn the computer on when it receives power. Consult your motherboard's manual and manufacturer's website.

Sources

Here is where I got my info from.
And of course /dogemining

Wrap Up

Congrats you've done it. You have managed to successfully get your shiny new asic mining away.
I do plan to make another guide detailing how to setup and use StarMiner a ready to go RPi mining distro.
So I hope this is helpful for you guys. I have seen lots of posts asking the exact same questions again and again and I have tried to answer these as best I can. I am still learning about this stuff so if there is something I have missed or a mistake I have made please tell me.
Anyway good luck. And I'll see you at the moon.
Cheers Frogsiedoodle
Edit 1: Layout and formatting.
Edit 2: Added instructions for screen which I initially forgot.
Edit 3: Removed 1 unneeded dependency
Edit 4: Added section on start on reboot and power failure.
submitted by Frogsiedoodle to dogemining [link] [comments]

How To Mine Doge with Ubuntu 13.10. (Part 1, for AMD Graphics Cards)

I feel the community really needs a resource like this. Because if I had a Doge for every-time taught a newbie how to Mine on Ubuntu, I would be a very rich doge!
EDIT: Sorry if it looks funny, Reddit doesn't like the numbers I put in for some reason.
If you have Ubuntu you have likely not upgraded because you think you cant mine on 13.10, and while that has been true in the past, a few people have got it figured out. So feel free to upgrade. If you are not on Ubuntu, Seriously you should consider using it. Even if its just on an older desktop.
Alright, so lets get a few things clear, I am assuming that you just FRESHLY installed Ubuntu 13.10 x64 on your system. I am assuming that you have no drivers, and no miners. You will need at least a key board and a mouse. The guide will be done in several parts, this first part is for most AMD Graphics cards. If you have an Nvidia, or just want to mine with your CPU, please check back later for those guides!
When reading this guide, please remember that as I give you commands to type into the terminal, Anything between { and} must be included. Do not copy and paste the {}.
Lets get started, If you have not already done so, Install Ubuntu 13.10 64Bit From Here (http://www.ubuntu.com/index_asus.html)
*1. Lets start by making sure you are up to date. Open up the terminal and enter this:
{sudo apt-get update && sudo apt-get upgrade} 
Let that run for a bit.
*2. Once that has finished we are going to download some applications we will need:
{sudo apt-get install dh-make dh-modaliases execstack libxrandr2 libice6 libsm6 libfontconfig1 libxi6 libxcursor1 libgl1-mesa-glx libxinerama1 libqtgui4} 
*3. Once that has run its course we are going to install the ssh server. Remember this command is going to make your computer shut down. While it is shut down, carefully install your graphics cards. If you don't have any experience with this, I suggest you 3 minutes to watch this guide, because failure to install a graphics card the right way can destroy it.
(http://www.youtube.com/watch?v=O9x097QRXeA)
{sudo apt-get install openssh-server sudo shutdown now} 
*4.Install your Card(s) and turn the computer back on.
*5. Make a new folder called "AMD DRIVERS123" inside of your download folder. Downoad the following 3 things into that folder. (1. AMD Drivers: http://support.amd.com/en-us/download/incomplete) (2. AMD APP SDK: http://developer.amd.com/tools-and-sdks/heterogeneous-computing/amd-accelerated-parallel-processing-app-sdk/downloads/) (3. AMD ADL SDK:http://developer.amd.com/tools-and-sdks/graphics-development/display-library-adl-sdk/)
*6. Ok, now we need to unzip and compile those drivers. So, open a terminal my right clicking inside of "AMD DRIVERS123". The enter this:
{unzip amd-catalyst*.zip chmod +x amd-catalyst*.run} {sudo ./amd-catalyst*.run --buildpkg Ubuntu/saucy} 
*7. Now we need to install the drivers. Enter the code exactly as you see it, don't worry, the first command will fail, we are expecting it too.
{sudo dpkg -i fglrx*.deb} {sudo apt-get -f install} {sudo dpkg -i fglrx*.deb} {sudo reboot} 
Your computer should now reboot.
(If this failed, you probibly need to remove the old drivers. Do this
{cd /etc/default sudo pico grub} 
Change the line:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset" 
Now save by pressing [CTRL+x]
{sudo update-grub} this will make the change perminent. {sudo reboot -n} Reboot with new settings. Once it starts back up try installing the new drivers again.) 
*8.GREAT! You are really on a roll! Now we need to update AtiConfig
{sudo aticonfig --initial --adapter=all} 
*9.Time to install the APP ADK:
{tar xvf AMD-APP-SDK*.tgz} {sudo ./Install-AMD-APP.sh} {sudo reboot} 
*10. WOOT! You are so close to diggin that sweet Doge!! Its time to download CGMiner. IMPORTANT NOTE! You need to get CGminer 3.7, IT IS THE ONLY ONE THAT WILL WORK. Do not get any older or newer, Just this. :
{sudo apt-get install git unzip git clone -b 3.7 https://github.com/ckolivas/cgminer} 
*11. Ok, now go back to "AMD DRIVERS123", Unzip AMD SDL SDK 6.0. Once you have it unzipped, go the file called "include", open it up, copy everything inside, then go find CGminer. Copy these files into the CGminer file called ADL_SDK.
*12. To install CGminer, we are going to need a few things. Get all of these.
{sudo apt-get install build-essential autoconf libtool libcurl4-openssl-dev libncurses5-dev pkg-config libudev-dev} 
*13. Lets go ahead and compile CGminer.
{cd cgminer} {./autogen.sh} 
*14. Ok, when you did that, it told you GPU was not supported, time to fix it.
{./configure --enable-opencl --enable-scrypt} 
(if you did it right you should now get this: OpenCL...............: FOUND. GPU mining support enabled scrypt...............: Enabled ADL..................: SDK found, GPU monitoring support enabled)
*15. If everything has been good so far then
{make} 
*16. MATHEMATICAL! Now lets get it set up to run a test.
{nano test.sh} {!/bin/bash export DISPLAY=:0 export GPU_MAX_ALLOC_PERCENT=100 export GPU_USE_SYNC_OBJECTS=1} {./cgminer -n} 
*17. Now save by hitting [Control+x][y][Enter]
*18.Lastly lets CHmod test.sh
{chmod+x test.sh} 
*19. TIME TO RUN THE TEXT!!!
{./test.sh} 
(If your output looks like this your ready to go!!! CL Platform 0 vendor: Advanced Micro Devices, Inc. CL Platform 0 name: AMD Accelerated Parallel Processing CL Platform 0 version: OpenCL 1.2 AMD-APP (1214.3) Platform 0 devices: 1 0 Tahiti GPU 0 AMD Radeon HD 7900 Series hardware monitoring enabled 1 GPU devices max detected)
*20. Excellent! Now we have it installed, its time to pick 2-3 pools, and get accounts set up at each of them. I currently use These 2, and If I find another I like I'll update. If you have a really awesome pool you would like me to include on the list, feel free to message me.
Pools: http://doge.cryptovalley.com/ (great community, server not super stable, but they have a chat. I hang out here a lot under the handle 'StrongBad' feel free to stop buy and ask questions)
https://dogehouse.org/ (Super stable pool, Great contests, super friendly, and they pay your miner a bonus if you find the block!)
Choose your pools, go to their sites and sign up. VERY IMPORTANT!!! Use different usernames and passwords for every mining site. If one site gets hacked, you don't want to give them a way to steal everything!!!!! Don't worry about the worker names and passwords being unique or complex tho, the most they can do with this is mine for you.
*21. Ok, now go to the CGminer folder, and open up a Terminal Window.
{sudo ./cgminer} 
This should start ./cgminer up with some really basic settings, and not pointed at any pool. Lets fix that: First press [p] to go to pool settings Now [A] and enter the information for the 1st pool. For instance if you are signing on for dogehouse: (Input server details: stratum+tcp://stratum.dogehouse.org:3333 Username: 'yourusername.workername password: 'yourpassword') If you got no errors, you did it right! Your miner should now connect and start to mine very slowly.
Now, do the same thing for all your other pools. the reason we do this is because Doge Coin pools are constantly being DDoS attacked, and this way your worker automatically switches over to a good pool if one go's down.
*22. time to save your current settings press [Enter] to get back out to the main menu, then [s] to bring up settings. Now press [W] to write a Config file. Name it DogeCoin.conf, and make sure to save it in the location it directs you too.
*23.OK! So, now we have everything set up to its basics. What you need to do now is sit down, and fine tune your Card(s). Its really early in the morning, and I need to get some sleep, I will add more on how to tune your card tomorrow in another post, and link it HERE:
Or, I will help you find the best configuration for your card(s). However as this is quite a bit of work, I do charge a small fee. Contact me with your card(s) information and I will get back to you right away. I generally let you decide how much to pay me.
This is my first ever guide on reddit! If you enjoyed it, or if it helped you please remember to upvote! I am going to start doing an educational YouTube series about Bitcoin, and will likely be doing a side program about Doge, if I find time and funding!! You can find that here: All tips are appreciated! DPTwcQreASwzt6TeWBWFb6Kz9ZU5Sezvr9 If you have any Questions, feel free to ask, I will get back to you ASAP.
Happy Digging everybody!
submitted by Sonofchange to Dogecoinmining [link] [comments]

Why is does it take so long to shut down an node used only as a JSON-RPC server?

I'm trying to sync a full node that will only be used as a JSON-RPC server (no mining). I tried to modify the config file and added a service unit, so that the node can run in a low-end VPS with minimum RAM and CPU capabilities. The problem is that the server takes too long to stop, and it's terminated by the system, so it always start rewinding blocks that have been already downloaded.
Here is my configuration file:
server=1 daemon=1 #debug=mempool debug=rpc # If run on the test network instead of the real bitcoin network # testnet=1 # You must set rpcuser and rpcpassword to secure the JSON-RPC api # Please make rpcpassword to something secure, `5gKAgrJv8CQr2CGUhjVbBFLSj29HnE6YGXvfykHJzS3k` for example. # Listen for JSON-RPC connections on  (default: 8332 or testnet: 18332) rpcuser=myuser rpcpassword=pypassword rpcport=8332 # Enable blocks pruning #prune=550 # Limit dbcache=50 maxconnections=4 rpcthreads=2 
And the service unit:
# It is not recommended to modify this file in-place, because it will # be overwritten during package upgrades. If you want to add further # options or overwrite existing ones then use # $ systemctl edit bitcoind.service # See "man systemd.service" for details. # Note that almost all daemon options could be specified in # /etc/bitcoin/bitcoin.conf [Unit] Description=Bitcoin daemon After=network.target [Service] ExecStart=/usbin/bitcoind -daemon=0 -datadir=/home/jsonrpc/bitcoin -conf=/home/jsonrpc/bitcoin/settings.conf ExecStop=/usbin/bitcoin-cli -datadir=/home/jsonrpc/bitcoin -conf=/home/jsonrpc/bitcoin/settings.conf stop # Creates /run/bitcoind owned by bitcoin #RuntimeDirectory=/home/jsonrpc/bitcoin WorkingDirectory=/home/jsonrpc/bitcoin User=jsonrpc Group=jsonrpc TimeoutStopSec=15m #CPUQuota=4% #MemoryLimit=128M #IOReadIOPSMax=10 #IOWriteIOPSMax=10 Type=simple #Restart=on-failure # Hardening measures #################### # Provide a private /tmp and /vatmp. PrivateTmp=true # Mount /usr, /boot/ and /etc read-only for the process. ProtectSystem=full # Disallow the process and all of its children to gain # new privileges through execve(). NoNewPrivileges=true # Use a new /dev namespace only populated with API pseudo devices # such as /dev/null, /dev/zero and /dev/random. PrivateDevices=true # Deny the creation of writable and executable memory mappings. # Commented out as it's not supported on Debian 8 or Ubuntu 16.04 LTS #MemoryDenyWriteExecute=true [Install] WantedBy=multi-user.target 
submitted by rraallvv to Bitcoin [link] [comments]

Optional Beginner Guide to Litecoin: TESTED 12/7/2013

Plan B: BAMT Live USB
This option is a last resort, hopefully not necessary. Download BAMT from the link below and "dd" via terminal to USB formatted to FAT32 in gparted. You can install gparted in xubuntu by typing:
sudo apt-get install gparted 
Next, launch gparted and format your USB drive. Be careful not to format your HDDs! You might double-check the storage sizes as a reference in the upper-right drop-down menu.
Download link: https://mega.co.nz/#!NI5W2QLT!dYt2UTZz0hrFoiMUAu0d01eSD4pjqXHT6U2UtnAAGJ4
Extract the file and locate "litecoinbamt1.1.img"
Put image on 2GB or greater USB formatted to FAT32 by opening terminal and running:
sudo dd if=/path/to/litecoinbamt1.1.img of=/dev/sdX (The "X" is the device name of your usb key. The one you will have seen in gparted, for example "sdb, or sdc, or sdd..." Try to get the right device on the first try. Use raw device *not* a partition.) sudo dd if=(you can drag and drop file into the terminal here to get the path) of=/dev/sdX 
CAN TAKE 15 MINUTES or more.
Perhaps try newer release of BAMT: https://mega.co.nz/#!qZ1TXRxD!Mcw8pkrP4SQE8D7bIfmZZEola01hxVFtbOBg6Cr3Zeo
sudo dd if=/path/to/litecoinbamt1.2.img of=/dev/sdX 
(source: http://www.bitcointrading.com/forum/linux-distros/bamt-version-0-5-easy-usb-based-mining-linux-with-farm-wide-management-tools/)
Plan A: Xubuntu BFGminer
Step 1: Get prepared. This is for a FRESH install of Xubuntu 13.10. Start with a fresh installation. Run the following in the terminal, line by line, one at a time. Press enter after each.
sudo apt-get install fglrx-updates fglrx-amdcccle-updates fglrx-updates-dev sudo aticonfig --lsa sudo aticonfig --adapter=all --initial sudo reboot 
(source: http://www.cryptobadger.com/2013/04/build-a-litecoin-mining-rig-linux/)
sudo apt-get install libcurl4-openssl-dev pkg-config libtool libncurses5-dev libudev-dev screen xterm sudo apt-get install git-core sudo apt-get install openssh-server byobu sudo apt-get install autoconf sudo apt-get install automake 
(source: https://coinaxis.com/index.php/entry/how-to-configure-linux-and-build-cgminer-for-bitcoin-and-litecoin)
sudo add-apt-repository ppa:unit3/bfgminer sudo apt-get update sudo apt-get install bfgminer sudo apt-get upgrade 
To launch:
bfgminer --scrypt -o stratum+tcp://world.wemineltc.com:3334 -u workername -p password -I 13 
(source: http://jarco.be/install-bfgminer-ubuntu-mint/)
submitted by Marco_X to litecoinmining [link] [comments]

I can't set up a full node!! Help!!

I open the port on my router, when check with "bitcoind getnetworkinfo"
I have 8 connections, try to use the IP and port on https://getaddr.bitnodes.io/ and it says not connected.
If I type in terminal: netstat -nptl
As a result I have this:
(Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:2628 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:8332 0.0.0.0:* LISTEN 24081/bitcoind tcp 0 0 0.0.0.0:8333 0.0.0.0:* LISTEN 24081/bitcoind tcp 0 0 127.0.0.1:5941 0.0.0.0:* LISTEN - tcp 0 0 127.0.1.1:53 0.0.0.0:* LISTEN - tcp6 0 0 ::1:631 :::* LISTEN - tcp6 0 0 :::25 :::* LISTEN - tcp6 0 0 :::445 :::* LISTEN - tcp6 0 0 :::139 :::* LISTEN - tcp6 0 0 ::1:8332 :::* LISTEN 24081/bitcoind tcp6 0 0 :::8333 :::* LISTEN 24081/bitcoind
If I try this http://www.lurkmore.com/mining/port8333/ it says that I haven't open the port, but this is untrue!
In port fowarding setup I have:
PORT FORWARDING SETUP
Server Name External Port Start External Port End Protocol Internal Port Start Internal Port End Server IP Address Schedule Rule Remote IP bitcoin 8333 8333 TCP 8333 8333 192.168.1.1 Always bitcoin1 8333 8333 TCP 8333 8333 192.168.1.2 Always bitcoin2 8333 8333 TCP 8333 8333 192.168.1.3 Always bitcoin3 8333 8333 TCP 8333 8333 192.168.1.4 Always folding_at_home 36330 36330 TCP 36330 36330 192.168.1.1 Always 0.0.0.0 
Why it doesn't works?
PS using this "sudo ufw allow 8333" nothing change...
submitted by pietrod21 to BitcoinBeginners [link] [comments]

Uso del Full Node Wallet BTCP Bitcoin Private da Terminale Linux

In questo post voglio dimostrare alcuni utilizzi del Full Node Wallet Bitcoin Private da terminale Linux
AVVERTENZA:
Usate questo tutorial con un piccolo quantitativo di BTCP, nell'esempio utilizzo 0,01 BTCP, almeno fino a quando non vi sentite sicuri nell'uso dei comandi. Fate attenzione! I comandi vengono eseguiti senza possibilità di annullarli, salvo in casi eccezionali, quindi fate tutto a vostro rischio.
PREMESSA:
Il wallet è già stato installato sul vostro PC o in un server Cloud usando le seguenti istruzioni:https://github.com/BTCPrivate/bitcoinprivate
Io uso una Ubuntu 16.04 LTS 64bit, ma i comandi sono simili anche per la distribuzione Windows.
Andrebbe anche aperta la porta TCP 7932 per avere un wallet perfettamente funzionante, ma ho fatto le prove senza aprirla.
Come attivare il firewall:
sudo ufw status
Please note: Make sure you enter the code in this order! If you do not, the program will not work! (If need be you can disable your firewall by entering: sudo ufw disable)
sudo ufw default allow outgoing sudo ufw default deny incoming sudo ufw allow ssh/tcp sudo ufw limit ssh/tcp sudo ufw allow http/tcp sudo ufw allow https/tcp sudo ufw allow 7932/tcp sudo ufw logging on sudo ufw enable
Apri un nuovo terminale troverai il prompt dei comandi, il mio è così, ma potrebbe essere differente:
[email protected]:~$ 
Scrivi quello che segue e premi invio:
[email protected]:~$ ./BitcoinPrivate/src/btcpd --daemon 
dovrebbe apparire il seguente messaggio:
BTCP Server Starting 
Questo significa che hai avviato il server (full node wallet) in modalità daemon, silenziosa. Per fermarlo scrivi:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli stop 
Otterrai la risposta:
BTCP server stopping 
Puoi anche avviare il wallet in una finestra del terminale e vederlo lavorare, anzichè usare il comando --daemon
[email protected]:~$ ./BitcoinPrivate/src/btcpd 
Vedreai apparire un logo del BTCP formato da tanti caratteri e la seguente scritta:
Thank you for running a Bitcoin Private node! You're strengthening the network and contributing to a social good. To ensure you are fully protecting your privacy when running BTCP, see . Block height | 340079 Connections | 8 Network solution rate | 8359387 Sol/s You are currently not mining. To enable mining, add 'gen=1' to your btcprivate.conf and restart. Since starting this node 1 minutes, 33 seconds ago: - You have validated 695 transactions! [Press Ctrl+C to exit] [Set 'showmetrics=0' to hide] 
Block height è l'allineamento del wallet con la blockchain, richiede tempo perchè si allinei e scarichi tutta la blockchain, dipende dalla velocità del tuo collegamento e del tuo pc.Connections: 8 sono i nodi a cui è collegato il nostro wallet, che è un vero e proprio nodo.
Network solution rate è la "potenza" di tutta la rete di elaborare i blocchi in Sol/s
Con un full node puoi partecipare anche tu a rafforzare la rete, abilitando il mining. Si tratta di un solo mining, quindi le probabilità di risolvere un blocco sono veramente minime.
Per farlo basta aggiungere la voce gen=1 nel file btcprivate.conf
Proviamo a farlo. Blocchiamo il nodo con il comando CTRL + C e aspettiamo che appaia il prompt di comando.
Appena appare, inseriamo i seguenti comandi:
[email protected]:~$ cd .btcprivate [email protected]:~/.btcprivate$ ls 
ci siamo spostati nella directory nascosta (inizia per .) contenente i file di configurazione di BTCP, ls mostra i file contenuti:
blocks btcprivate.conf chainstate db.log debug.log fee_estimates.dat peers.dat wallet.dat 
puoi vedere il file btcprivate.conf e wallet.dat che è il file del wallet del nodo. Editiamo ora il file di configurazione, io uso PICO, un text editor per linux, ma potete usare anche vi se preferite:
[email protected]:~/.btcprivate$ pico btcprivate.conf 
inserite gen=1 in una riga vuota del file di configurazione e poi chiudete l'editor salvando con i comandi CTRL+X e Y
gen=1 
tornate nella directory home:
[email protected]:~/.btcprivate$ cd 
Fate riavviare il wallet con il comando:
[email protected]:~$ ./BitcoinPrivate/src/btcpd 
Otterrete il seguente output:
Block height | 340091 Connections | 8 Network solution rate | 8211926 Sol/s Local solution rate | 0.0075 Sol/s Since starting this node 8 minutes, 5 seconds ago: - You have validated 684 transactions! - You have completed 1 Equihash solver runs. You are mining with the default solver on 1 threads. 
Congratulazioni! State minando!
Ora diamo un occhiata al file wallet.dat
ATTENZIONE:
wallet.dat è il vostro wallet, se lo cancellate o lo riscrivete perderete tutti i BTCP che contiene. Consiglio di farne una copia ma attenzione: wallet.dat non è crittografato, quindi vi consiglio di crittografarlo prima di spostarlo dal PC: primo faccio una copia.
Bloccate nuovamente il wallet con CTRL+C
Al prompt scrivete:
[email protected]:~$ cd .btcprivate 
Poi copiate il file sul Desktop (scrivania) Sostituite la parola Desktop con Scrivania se avete installato Linux in Italiano
[email protected]:~/.btcprivate$ cp wallet.dat home/btcp/Desktop/wallet_btcp_back.dat 
Ora troverete il file wallet_btcp_back.dat sulla scrivania, crittografatelo AES256 usando il gestore degli archivi GUI e impostando una password resistente. Per verificare che tutto funzioni, vi consiglio di fare una altra copia di wallet.dat, estrarre il file dall'archivio crittato e sostituirlo al wallet.dat. se tutto funziona siete a posto. Se non siete sicuri non fate nulla e non usate questo wallet per mettere i vostri BTCP, ma nolo per scopi didattici con pochi spiccioli. E' facile fare errori e perdere tutto.
Tornate alla directory home e riavviate il server in daemon mode.
proviamo alcuni comandi usando il client: btcp-cli
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli help 
Se tutto funziona correttamente vi risponderà con la lista di tutti i comandi disponibili:
z_exportwallet "filename" z_getbalance "address" ( minconf ) z_getnewaddress z_getoperationresult (["operationid", ... ]) z_getoperationstatus (["operationid", ... ]) z_gettotalbalance ( minconf ) z_importkey "zkey" ( rescan startHeight ) z_importwallet "filename" z_listaddresses z_listoperationids z_listreceivedbyaddress "address" ( minconf ) z_sendmany "fromaddress" [{"address":... ,"amount":...},...] ( minconf ) ( fee ) z_shieldcoinbase "fromaddress" "tozaddress" ( fee ) zcbenchmark benchmarktype samplecount zcrawjoinsplit rawtx inputs outputs vpub_old vpub_new zcrawkeygen zcrawreceive zcsecretkey encryptednote zcsamplejoinsplit [email protected]:~$ 
Benissimo! Ora proviamo ad usare qualche comando, comunciamo con getinfo
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getinfo 
Risposta:
{ "version": 1001251, "protocolversion": 180004, "walletversion": 60000, "balance": 0.00000000, "blocks": 340074, "timeoffset": 0, "connections": 8, "proxy": "", "difficulty": 167290.7158221716, "testnet": false, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000, "relayfee": 0.00000100, "errors": "" } [email protected]:~$ 
Nella risposta troverete alcune informazioni sul wallet, versione, block height, connections, balance = 0 ecc ecc
Proviamo ora getblockchaininfo:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getblockchaininfo 
Risposta:
{ "chain": "main", "blocks": 340074, "headers": 340074, "bestblockhash": "0000000145c0011d8e914f4ba68d1443c7ae0dd15bdf0bc300994dd5282710aa", "difficulty": 165971.1181999981, "verificationprogress": 0.9999992572690658, "chainwork": "0000000000000000000000000000000000000000000000000002e8314e4484da", "pruned": false, "commitments": 663480, 
La sincronizzazione in questo caso è terminata:"verificationprogress": 0.9999992572690658, (99,99999%)
Ora proviamo getwalletinfo
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getwalletinfo 
Risposta:
{ "walletversion": 60000, "balance": 0.00000000, "unconfirmed_balance": 0.00000000, "immature_balance": 0.00000000, "txcount": 0, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 } [email protected]:~$ 
Proviamo a ricevere dei BTCP da un wallet esterno, per prima cosa abbiamo bisogno di un transparent address da comunicare a chi ci invia i BTCP. Lo otteniamo con il comando getnewaddress:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getnewaddress 
Risposta: otteniamo un indirizzo (le xxx le ho aggiunte per mascherarlo)
b1Cabjwvcce7N8ea9Gxxxxxxxxxxxxxxxx [email protected]:~$ 
Inviate con un vostro wallet grafico o con electrum pochi BTCP, io ne ho mandati 0.01 per prova, dopo che li avete inviati, verificate se sono arrivati:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getwalletinfo 
Risposta:
{ "walletversion": 60000, "balance": 0.00000000, "unconfirmed_balance": 0.01000000, "immature_balance": 0.00000000, "txcount": 1, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 } 
Arrivati ! "Unconfirmed balance" 0.01! non sono ancora confermati, quindi aspettate un po' e ripetete il comando:
"walletversion": 60000, "balance": 0.01000000, "unconfirmed_balance": 0.00000000, "immature_balance": 0.00000000, "txcount": 1, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 
Adesso balance è 0.01 perfetto!
Proviamo adesso ad inviare questi BTCP ad un nuovo T-Address, per semplicità li invierò ad un indirizzo di questo wallet
Generiamo un nuovo indirizzo per riceverli:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getnewaddress 
Otteniamo:
b1Nb42GoK9kmsxxxxxxxxxxxxx 
copiamo l'indirizzo e usiamo il comando sendtoaddress "btcpaddress" amount ( "comment" "comment-to" subtractfeefromamount )
il parametro subtractfeefromamount puo' essere true or false a seconda se vogliamo che le fee vengano detratte dall'ammontare inviato o meno. Io invio tutto quanto al nuovo indirizzo e quindi le fee vanno dedotte da questo:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli sendtoaddress "b1Nb42GoK9kmsxxxxxxxxxxxxx" 0.01 "" "" true 
Risposta:
2c5d3d1a3b5eec414b721d3817487f53c5eebxxxxxxxxxxxxxxx [email protected]:~$ 
Controlliamo cosa è successo:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getwalletinfo 
Risposta:
{ "walletversion": 60000, "balance": 0.00999808, "unconfirmed_balance": 0.00000000, "immature_balance": 0.00000000, "txcount": 2, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 } 
Come vedete i BTCP sono diminuiti, perchè sono stati spostati su un nuovo indirizzo dello stesso wallet, pagando le fee. Ora vediamo esattamente dove sono e dove erano:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli listreceivedbyaddress 
Risposta:
[ { "address": "b1Ep2wi2tUnKf433Vaxxxxxxxxxxxx", "account": "", "amount": 0.01000000, "confirmations": 6, "txids": [ "833533440a13c09fda6e90d0c5xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" ] }, { "address": "b1Nb42GoK9kmsVZ9KPxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "account": "", "amount": 0.00999808, "confirmations": 1, "txids": [ "2c5d3d1a3b5eec414b721d3817487f53c5xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" ] } 
Questo comando vi da informazione di tutti gli indirizzi usati, vediamo solo gli indirizzi non spesi: listunspent
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli listunspent 
Risposta:
[ { "txid": "2c5d3d1a3b5eec414b721d381748xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "vout": 0, "generated": false, "address": "b1Nb42GoK9kxxxxxxxxxxxxxx", "account": "", "scriptPubKey": "76a914c6bdf3bc8aedxxxxxxxxxxxxxxxxxx", "amount": 0.00999808, "confirmations": 6, "spendable": true 
Ottimo!
Ora possiamo provare un comando che ci permette di estrarre la chiave provata da un indirizzo pubblico. Questo puo' essete utile in occasione di Fork o Airdrop per estrarre le monete.
ATTENZIONE: esporre a terzi le chiavi private è rischioso. Potrebbero rubare tutto il contenuto. Fate molta attenzione. Estraete le private keys solo se necessario o per fare delle prove su indirizzi che contengono pochi spicci. In ogni caso, dopo aver usato la private key meglio non riutilizzare quell'indirizzo.
Il comando da utilizzare è dumpprivkey T-ADDRESS
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli dumpprivkey b1Ep2wi2tUnxxxxxxxxxxx 
L'output sarà tipo il seguente, al solito la chiave è mascherata con delle xxxxxx
Kz29e62Bmxxxxxxxxxxxxxxxxxxxxxxx 
Ora proviamo lo swipe della chiave, cioè il wallet andrà a cercare nella blockchain tutti gli importi collegati a quella pvt key, : importprivkey "btcpprivkey" ( "label" rescan )
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli importprivkey "Kz29e62Bmxxxxxxxxxxxxxxxxxxxxx" "" true 
Ora proviamo a fare delle Shielded Transaction, queste transazioni utilizzano la tecnologia zk-Snark per mascherare importi e indirizzi. Per prima cosa dobbiamo ottenere un indirizzo Shielded dal nostro wallet.
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_getnewaddress 
Eccolo generato:
zkEvCiVwgHb3NFi2ee9HGPjno2xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 
Vediamo dove sono i nostri BTCP, al momento sono solo su indirizzi Transparent:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_gettotalbalance 
Answer:
{ "transparent": "0.00999808", "private": "0.00", "total": "0.00999808" } 
ora mandiamo qualche BTCP all'indirizzo z_address. Per prima cosa dobbiamo recuperare l'indirizzo t-address dove si trovano:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli listunspent 
Eccoli:
[ { "txid": "72f568d1ed51524b69f1xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "vout": 0, "generated": false, "address": "b1LDhxBJxxxxxxxxxxxxxxxxxxxxxx", "scriptPubKey": "76axxxxxxxxxxxxxxxxxxxxxxxxxxxxxxe088xx", "amount": 0.00889808, "confirmations": 556, "spendable": true } ] 
Adesso mandiamo un po' di BTCP all'indirizzo Shielded che abbiamo ottenuto sopra. Il comando è abbastanza complicato ma funziona cosi':
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_sendmany "b1LDhxBJxxxxxxxxxxxxxxxxxxxxxx" "[{\"amount\":0.001, \"address\":\"zkEvCiVwgHb3xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx\"}]" 
Risultato:
opid-xxxxxxx-36c4-xxxx-beb2-xxxxxxxxxxxx 
Una transazione zk-Snark è piuttosto pesante da elaborare, il mio vecchio PC ci mette un po'. Meglio disattivare processi inutili. Si puo' controllare se l'operazione è andata a buon fine:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_getoperationresult 
al termine dovreste ricevere il seguente output:
[ { "id": "opid-xxxxxx-xxxxx-4a5d-beb2-xxxxxxxxxx", "status": "success", "creation_time": 1529426885, "result": { "txid": "f87e8d5e96a8a0xxxxxxxxxxxxxxx" }, "execution_secs": 216.686332567, "method": "z_sendmany", "params": { "fromaddress": "b1LDhxxxxxxxxxxx", "amounts": [ { "amount": 0.001, "address": "zkEvCiVwgHb3NFxxxxxxxxxxxxxxxxxxR" } ], "minconf": 1, "fee": 0.0001 } } ] 
Fatto! Sul mio vecchio PC ci sono voluti 216,68 secondi!
La prossima prova sarà un invio da indirizzo Shielded a Transparent.
Play with your full node wallet and have fun.Remember: these commands are almost the same in all the bitcoin based coins, so you also learnt how to use many other wallets!
submitted by xivan71 to u/xivan71 [link] [comments]

Mining Altcoins (Lbry coin) on Ubuntu  Nvidia - CCminer Bitcoin Mining on Ubuntu 18.10 - Bitcoin Mining Software ... tutorial: Bitcoin mining with CGMiner - YouTube Bitcoin Mining on Ubuntu - YouTube Mining Bitcoin di Linux Menggunakan M7MHASH WORK!!!

This article focuses on Ubuntu only, but the configuration and mining process are almost the same in other operating systems as well. To get optimum performance out of the miner, it’s recommended to upgrade Ubuntu to the latest stable release before continuing. The special thing about BFG Miner is it’s completely written in C language, and thus it’s quite efficient at mining bitcoins, at ... Connect to the mining computer using SSH using a Linux or Mac system. To connect to your mining computer using SSH, open up a terminal and type in: ssh IP_address_of_mining_computer. For example I would use: ssh 192.168.1.71. It should then ask you to login (using your username and password that you setup in the installation of the Linux OS) Although Ubuntu carries Bitcoin Core in the Software Center, the release tends to be out-of-date. For this reason, this tutorial won’t use the Software Center. Compilation from source offers one alternative, but involves many steps. A more direct route is to install a precompiled binary from the command line. Searching for the Terminal application. The method described here uses Terminal, an ... Just like with Bitcoin, there are two options for mining: solo and pooled mining. Solo mining is when you are running the client in server mode and connect to it with your mining software. If you find a block, the whole 50LTC reward goes to you (~70$ currently). If, however, you do not find a block, there is no reward. This is a high risk high ... It was originally simply called “Bitcoin Pooled Mining Server” or BPMS for short. Since the launch, the pool has had its ups and downs but things have been mostly positive recently. Satoshi Labs run Slush Pool. You may also know Satoshi Labs from their work on Trezor, the first Bitcoin hardware wallet and Coinmap, a world map outlining which merchants accept Bitcoin. They also invented the ...

[index] [31624] [34231] [45698] [17359] [35864] [28435] [13428] [10169] [7899] [5008]

Mining Altcoins (Lbry coin) on Ubuntu Nvidia - CCminer

Mining XMR Ubuntu 16 AWS amazon minergate This is a tutorial which shows how to mine WebDollar in linux terminal.The wallet address is a default one, in order to have access to the private keys you need to import your own one. Github ... Bitcoin Mining on Ubuntu 18.10 - Bitcoin Mining Software 2019 - Duration: 24:00. Bitcoin Mining Software 2019 4,900 views. 24:00. How to Brute Force a Bitcoin Wallet with Hashcat - Duration: 16 ... How to mining Bitcoin with your Ubuntu VPS? Earn 0.0001 BTC per VPS, if you have 10 VPS, you will earn 0.001 BTC per day (~2.5 USD), if you have a lot of VPS, you will earn more BTC per day. Setup ... In this video I show you how to start mining Bitcoins with CGMiner and an account at your favorite miningpool. Get CGMiner at: https://bitcointalk.org/index....

#